Right-angle prism is commonly used for 90 ° optical path bending. Based on the positioning of the prism, the image can be inverted, but about the same. If the prism rotated 90 °, through the shuttle will be the mirror to see the image upright, but the left and right reversed. This right-angle prism can be used to offset the image and lighting systems. 
 Indicators: 
 First quality materials .................................... K9 
 Tolerance ..............................+ 0.0,-0.2mm 
 Aperture .................................> 85% 
 Surface shape ................................ λ / 4@632.8nm 
 See table angle tolerance ............................... 
 Finish ................................. 80-50 S / D 
 .................................. 0.25mm × 45 ° chamfer 

 90 ° deflection of the surface occurs, the image is set and the erection of slope case. 



 180 ° deflection, with the slope to the incident surface. The most important application is used as a return mirror, the incident surface may include the apex. 



 Dimensions (mm) 
 3 'off 
 1 'deviation from the 
 30 "deviation from the 

 A = B = C = 3.2 
 SRAP1001 
 SRAP2001 
 SRAP3001 

 A = B = C = 4.0 
 SRAP1002 
 SRAP2002 
 SRAP3002 

 A = B = C = 10.0 
 SRAP1003 
 SRAP2003 
 SRAP3003 

 A = B = C = 12.7 
 SRAP1004 
 SRAP2004 
 SRAP3004 

 A = B = C = 20.0 
 SRAP1005 
 SRAP2005 
 SRAP3005 

 A = B = C = 25.4 
 SRAP1006 
 SRAP2006 
 SRAP3006 

 A = B = C = 30.0 
 SRAP1007 
 SRAP2007 
 SRAP3007 

 A = B = C = 50.8 
 SRAP1008 
 SRAP2008 
 SRAP3008